website Skip to content

Search Products

5 Types of Jade Bangle Treatment

profile picture of Wai Yan

Written By: Wai Yan
28 December 2018

A Brief Overview

Detailed explanation of the various artificial treatments one can encounter in the jade market today. It's important to be aware of these treatments as they have a tremendous impact of the value and longevity of the jade bangle. Different levels of treatments are classified into the 5 grades or types by international standards. The following 5 types of treatment on Jade Bangles are discussed in this article:

  • 1. GRADE / TYPE A
  • 2. GRADE / TYPE B
  • 3. GRADE / TYPE C
  • 4. GRADE / TYPE B+C
  • 5. GRADE / TYPE D

History of Jadeite Treatments

First reported cases of Treated Jade Bangles came about in the 1950s where organic dyes were used to enhance the colour of a green or lavender Jade Bracelets. Jadeite Jade is a porous mineral, the nature of the interlocking crystalline structure allow minute gaps or capillaries to absorb organic dyes. The first composites of Jadeite Jade Cabochons also appeared around the same time in the form of a triplet. Around the mid to late 1980s a new treatment method was introduced to the Chinese Jade Bangle Market, particularly in Hong Kong and Taiwan. It’s a treatment that can make low quality Jadeite Jade Bangles look like fine quality, translucent Jade Bangles. It was the introduction of Type B or Grade B Jade. It is the most common type of treatment for Jade Bangle Bracelets in the market today.

Why are Jade Bangle Bracelets Treated?

To answer this question we need to understand why High Quality Jade Bangles are valued so highly in the market. It’s because the supply of this fine quality jade is very limited. Millions tons of earth is turned over just to maybe find a small Vibrant apple green stone that’s translucent and fine in texture. Unlike Diamonds, which is found throughout the world, Jadeite is only found in commercial quantities in Myanmar (Burma). Understanding that the supply is limited, the demand for high quality Jade Bangles is still very high. This is where the treated Jade Bangles fill in the supply that nature can’t keep up with. To fool the unsuspecting consumers into thinking they have gotten a great deal.

Figure 1. The photo shows an area of a Type B Jade Bangle where the polymer on the surface has started to degrade revealing the corrosion it once use to conceal.

Law of Disclosure

The Australian Competition and Consumer Commission (ACCC) has set out regulations and guidelines to protect consumers from fraudulent trade practices in the Jewellery industry. Jade Bangles that has been treated to enhance their appearance needs to be sold with full disclosure for the type of treatment it has undergone. Although these regulations are in place, many sellers and retailers locally and overseas continue to sell treated products without any disclosure. At MAYS GEMS, we follow the guidelines set out by the ACCC and the Gemmological Association of Australia (GAA) to disclose any gemstone treatments including Jade Bangle Bracelets which are also accompanied by our own Certificate of Guarantee.

Imitation Jade

Before we even discuss about the different treatments on Jadeite Bangles, we need to ensure that it’s not an imitation or fake Jade Bangle bracelet. There are many so called Jade Bangles out there in the market that are not even Jadeite Jade but just looks like one. Some are made of Quartz while others are just plain glass. Treatments discussed in this article only apply to Jadeite Jade Bangle Bracelets.

Grade A Jade

Type A or Grade A Jadeite Jade Bangles are accepted in the market as untreated, natural products even though most goes through a traditional cleaning and waxing treatment process. The treatment is recognised internationally as standard practice and does not require disclosure.

Figure 2. Example laboratory report that accompanies some of our exclusive Jade Bangles to confirm that there are no treatments.

Washing and Waxing

The freshly carved Burmese Jade Bangles Bracelets after going through the different stages of polishing is placed into a mild acidic bath using plum juice to remove any leftover abrasives from the cutting and polishing processes. They are then soaked in paraffin wax and given a final polish with a clean cloth. Waxing helps the Jade Bangle to maintain its lustre by preventing body oils, sweat and dirt to enter its porous surface. The treatment doesn’t affect the Jade Bangle’s internal structural integrity or durability.

Appearance of Grade A Jade Bangle

The appearance of a Type A Jade Bangle can be any combination of these 4 factors: colour, translucency, texture and flaws. They can range from opaque to near transparent and can have fine to coarse texture appearance. The colours of these bangles are generally found in varying shades of Green, White and Lavender. Rarely are they carved in yellow or red. Flaws, internal or surface reaching, are usually present on these Jade Bangle Bracelets.

Figure 3. Type A Bangles in this diagram clearly shows natural flaws that strongly indicates that it's untreated. Note: Not all natural bangles will have such revealing indicators.

Grade B Jade

Type B or Grade B Jade, treated Jade Bangle are ones that have been subjected to corrosive chemical bleaching and later impregnated with polymers. In some cases, the bleaching is so severe that it can no longer be classified as Jadeite Jade. The treatment alters the structural integrity of the Jadeite and makes the bracelet brittle. Dealers must legally disclose this type of treatment.

Starting off Material

Lower quality Jade Bangles that contains high amounts of brown or dark inclusions caused by oxidised iron and other mineral inclusions. These bangles usually have large amounts of surface reaching fractures with iron staining.

Figure 4. Before and after chemical bleaching treatment example. Brown stains and unwanted dark inclusions have been removed and fractures hidden by the impregnated polymer.

The Bleaching Process

The goal of the treatment is to remove the undesirable brown coloration and hide flaws. It starts off with the bleaching; Preformed Jade Bangles to be treated are placed in a bath with highly concentrated hydrochloric acid or nitric acid for few hours to weeks depending on the porosity and severity of the inclusions. Some treaters heat the bath and place it under pressure to intensify the corrosion process. After the bleaching process, all the brown discoloration have turned white to pale green and stained fractures are not as apparent. They are then placed in caustic soda bath to neutralise the strong acid. Now the bangles are ready to be injected with a polymer of similar refractive index to Jadeite. Dyes can also be mixed with the polymer at this stage. The process is complete after a final polish. 

B Jade Appearance (After Treatment)

The appearance of a Treated Jadeite Bracelet is that of a high quality Type A Jade. They are pale green to white in colour with excellent translucency and lack in flaws. The bleaching has removed most or all of the undesirable colours and revealing fractures while the impregnated polymers hide surface flaws and internal voids resulting in an improvement in translucency.

Figure 5. Typical appearance of a Type B treated Burmese Jade Bangle Bracelet.

Durability of Treated Grade B Jade Bangles

Heavy corrosion caused by the chemical bleaching leaves large voids where the inclusions has been eaten away. This affects the structural integrity of the Jade Bracelet. In some cases, the bleaching is so severe that the Treated Jade Bracelet can crumble with pressure from the fingers alone. The impregnation of polymers to fill these voids helps stabilise the structure but the overall durability of a Treated (B) Jade Bangle  is still considered brittle. Furthermore, the impregnated polymer is subject to degradation. As time passes, the once hidden voids, cavities, fractures and surface pits will become apparent. Extra care is required for Bangles treated with this method to maintain its original condition. Refer to this guide on how to care for your Jade Bangles.

Figure 6. Voids left behind from chemical bleaching filled by polymer evident as whitish clouds. Only apparent after the polymer has started degradation like in this bangle.

Identification of Polymer Impregnation

Positive identification of a polymer impregnated Jade Bangle requires advance instrumentation such as a FTIR (Fourier-transform infrared spectroscopy) machine only available in specialised gemmological laboratories. There are however other methods that an experienced gemmologist would use to give indications of a Treated Jade Bangle. For more information refer to this article on How to identify Treated Jade Bangle Bracelets.

Value of Treated Jade Bangles

Type B Treated Jade Bracelets has little value and it’s worth only a small fraction (5-10%) of an equivalent Type A natural counterpart. Treated Jade Bangles will not last the test of time. Once the polymer inside starts to deteriorate, its once pretty appearance will be left with ugly void and fractures. Hence, referring to the graph below, over time, treated jade bangles will be worthless. They are not suitable as an investment or heirlooms.

Figure 7. A graph showing the value over time of Type A Natural Jade Bangles compared to treated type Jade Bangles.

Grade C Jade

This type of Jade Bangle is dyed to improve its colour. Jadeite is a porous mineral, the minute gaps and holes in between its interlocking crystal grain structure allows it to receive organic dyes well. It’s an unacceptable treatment and must be disclosed to consumers.

Materials Used

White or light coloured Jade Bangles of opaque to translucent transparency are used to enhance their colour.

Jade Bangle Dyeing in Myanmar

In the recent years, dyed Type C Jadeite bangles have started to appear in the Myanmar Jade Market. Today, these treated bangles are seen everywhere. Learn more about the process here: Dyed Jade Bangles in Myanmar.

Figure 8.1. Workers at a Jade treatment factory in Myanmar.

Figure 8.2. Concentration of green colour can be seen where the green dye has been painted on.

Jade Bangle Dyeing Process

Preformed unpolished bangles are placed in a bath of heated dye solution and placed under pressure to force the dye deep into the crystal structure. While this method gives a uniform colouration, there is another method to paint intricate designs onto bangle with dyes to mimic a natural pattern.

Durability of Grade C Jade Bangles

Grade C Jade Bangles are not subjected to chemical bleaching therefore the structural integrity remains intact. However, the treatment itself is not stable and will not last the test of time. Special attention and care must be given to maintain its vibrant colours as describe in How to care for your Jade Bangle article. 

Appearance after Dyeing

Grade C Jade Bangles are not subjected to chemical bleaching therefore the structural integrity remains intact. However, the treatment itself is not stable and will not last the test of time. Special attention and care must be given to maintain its vibrant colours as describe in How to care for your Jade Bangle article. 

Figure 9.1. Uneven distribution of green colour seen on this Type C Dyed Jade Bangle.

Figure 9.2. Recently dyed jade bangles seen stacked even in the middle. On the right are untreated bangles about to be dyed. Notice the difference in saturation.

Identification of Dyes in Jade Bangles

Apart from the obvious visual indicators, a suspected dyed jade bangle can be examined under UV luminescence or a Chelsea filter. Some dyes may be detected with a reaction of either of these testes. A positive confirmation requires the use of advance instrumentation to detect the dyes much like Type B Jade. 

Value of Grade C Jade Bangles

Dyed Jade Bangles have a low value they are worth between $10-$50. Like any other treated Jade Bangle, these will not last the test of time and will lose the once vibrant colours, making them worthless over time. They are not suitable as an investment or heirlooms.

Grade B+C Jade

Just as a title indicates, Type B + C Jade Bangle Bracelets are treated using a combinations of the two methods above. They are first bleached, dyed and then injected with a polymer to enhance the translucency and colour. The resultant bracelet one that has a appearance of a high quality Jadeite. It’s translucent with the most desirable colours and without any flaws. 

Figure 10. Degrading dyed polymer in a B + C Jade Bangle.

Grade D Jade

This type of Jadeite treatment doesn’t not apply to Jade Bangles but more so in the jade cabochons or faceted pieces. These are composites gemstones where Natural Jadeite has been glued onto another material such as glass or plastic. They are rare in the industry and the term itself is hardly used. 


Jadeite Jade being a valuable and highly sought after gemstone attracts many methods to deceive consumers into buying an inferior product that only appears to be superior. By examining the processes of these treatments and the materials used, we can begin to understand that these treated Jade Bangles are not what they appear to be. The treatments are temporary and will deteriorate over time. Consumers must be vigilant in the identification of these treatments with the difference in price that can be astronomical. Disclosure of treatment is required by law but not always followed through. Even then, the sellers themselves might not have sufficient knowledge on the subject to be able to disclose any treatments. Buying a Natural Jade Bangle will last forever while a treated one would last a few years. 

About the Author
Wai was born and raised in Yangon, Myanmar (Burma). Trained by the Gemmological Association of Australia, he is a qualified Gemologist and a fellow of the GAA. Throughout his life, he has been in constant contact with gemstones and jewellery through the family business and has been fascinated by the beauty and rarity of them all. He is now operating a branch of the business in Australia, supplying all kinds of gemstones especially of Burmese origin to international markets.

Further Reading

Jade Pendants 101: Meanings and Symbolism

Jade Pendants 101: Meanings and Symbolism

Uncover the rich cultural significance and diverse symbolisms behind jade pendants. This article covers all jade pendant designs from various cultures such as: Chinese, Maori and Mesoamerican and their meanings.
Read more
Fake Jade with Fake Certificate from China: A Gemologist Review

Fake Jade with Fake Certificate from China: A Gemologist Review

A gemologist debunks jade scams involving fake certificates from China.
Read more
Exploring the Meaning and Symbolism of Jade Bracelets

Exploring the Meaning and Symbolism of Jade Bracelets

This article delves into the cultural significance, symbolism, and spiritual beliefs associated with jade jewellery, focusing on jade bangle bracelets. It highlights the meaning and symbolism of jade bracelets in Chinese culture and other cultures.
Read more
a jade bangle bracelet held up against a sunny sky.

5 Hidden Benefits of Wearing a Jade Bangle Bracelet

In this article, we delve into the captivating world of jade bangle bracelets, uncovering their popularity as a jewelry choice and the array of benefits they bring to those who wear them. From their exquisite beauty and unmatched value to the profound impact on wellbeing, we explore five key benefits of donning real jade bangle bracelets. Prepare to be amazed by the remarkable advantages these stunning pieces offer, extending far beyond aesthetics.

Read more
How a Jade Bangle is Made Traditionally

How a Jade Bangle is Made Traditionally

How Jade Bangles are Made Traditionally made in Myanmar (Burma). This article explains the processes of how a jade bangle is crafted from rough boulder to a fine piece of jewellery.
Read more
5 Types of Jade Bangle Treatment

5 Types of Jade Bangle Treatment

Detailed information on treatments applied to Jade Bangle Bracelets. Treated Jade Bangles are common in the market place today and are there to deceive consumers.
Read more

1 comment

  • I would like to know ‘How to treat jade’.Your article is so helpful for me.So thank you so much.

     U Soe

Leave a comment

Please note, comments must be approved before they are published

Add Special instructions for your order
Coupon Code